1 / 4
Spiral spring Catapult remixed + projectiles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdier design of the awesome catapult
- Ocena
- 4,833 / 5
- Polubienia
- 15
- Pobrania
- 130
- Wydruki
- 5
- Wyświetlenia
- 989
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 5) (Komentarze: 11)Remiksy (0)Kolekcje (22)Powiązane
I found the catapult of @Lilimill2000 incredible, but without gluing it, it was dismantling quite quickly and the “stop bar” was breaking quite easily.
What I modified:
- The stop bar is now larger and can be clipped to the model. It gives a lot more of integrity
- The front bar is now a clipped inside of the left/right side, and you need to screw it.
- The trigger bar has now 2 spacer that forces the trigger to be in the middle
- The trigger bar is also clipped inside and screwed to the frame.
And that's it. Now it's quite sturdy and I didn't managed(yet) to break the stop bar.
You will need 4x M3 12-16mm screws.
Also bonus, i added some projectiles
Beware, it's quite strong and maybe not for children ;)