1 / 2
CoolCabana Clip-On Hook for Towels/Hats/Wet Clothes or Bags — zdjęcie 1
1 / 2

CoolCabana Clip-On Hook for Towels/Hats/Wet Clothes or Bags

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-on folding hook for CoolCabana roof rods. Slides along the rod, folds up when packed, and holds towels, bags, hats.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

CoolCabana Clip-On Folding Hook

Overview

This is a simple clip-on hook designed specifically for CoolCabana lower roof rods.
It snaps onto the rod, slides along to wherever you need it, and folds up neatly with the cabana when packing down, no removal required.

I designed these so we could finally hang towels, wet clothes, hats, small bags, and kids’ gear without draping everything over chairs or dumping it in the sand.

They live permanently on the lower roof rods and stay out of the way until you need them.


Key Features

  • Clips directly onto CoolCabana lower roof rods

  • Slides freely along the rod for flexible placement

  • Folds up with the CoolCabana when packing down

  • No tools, no fasteners, no permanent mods

  • Super quick, low-material print


What You Can Use It For

  • Beach towels

  • Wet swimmers or kids’ clothes

  • Hats and caps

  • Small backpacks or tote bags

  • Reusable shopping bags

  • Light camping or beach accessories

(They’re great for keeping wet items off the sand and improving airflow for drying.)


Print Settings

This model is intentionally simple and prints fast.

Recommended settings:

  • Layer height: 0.2 mm

  • Infill: 15%

  • Supports: None

  • Brim/Raft: Not required

  • Orientation: Print as-is

Material:

  • PLA works perfectly for most users

  • PETG recommended if you live in extremely hot climates or plan to hang heavier items

Mine are all printed in PLA and have survived 45°C Australian summer days without any issues.


Build Notes & Tips

  • Prints cleanly on most printers with no tuning required

  • If your printer runs slightly hot, reduce temperature a touch for a cleaner clip edge

  • PETG will flex a little more, which can be helpful for heavier loads


Installation

  1. Clip onto the lower CoolCabana roof rod

  2. Slide to your desired position

  3. Hang your items

  4. Leave it in place when packing down, it folds up with the cabana

That’s it.

Tagi