Squat Rack Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate with 6 hanger for a power rack / squat rack
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
I needed to hang a bunch of bands and straps in my home gym, but didn't want to mount anything on the wall. So I designed a simple a 5+1-hook add-on for a 2x2 power rack with 20 mm holes. This is intended for lighter items like bands and straps. The pegs are angled 5 degrees upward so things don't slide off. Secured to the rack with a threaded nut that prints on the same plate.
I printed this using PETG-HF, but I think it will work fine with PLA as well. I recommend 3 walls and 15% infill, but it also works with 2 walls, just a bit more bendy. Obviously need supports.
If requested, I can easily adjust to different size racks and mounting holes or simply adjust the parameters in the included F360 file.