1 / 3
Match Saver for Benelli M4 T-Pro - 12GA - Screw Mount — zdjęcie 1
1 / 3

Match Saver for Benelli M4 T-Pro - 12GA - Screw Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This really can save your matches! It fit's perfectly on the hand guard of a Benelli M4 T-Pro, e.g. Super 90 T-Pro.

Ocena
0 / 5
Polubienia
5
Pobrania
90
Wydruki
0
Wyświetlenia
607
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This really can save your matches!

It fit's perfectly on the hand guard of a Benelli M4 T-Pro, e.g. Super 90 T-Pro. It's made for 12GA and will work with all sizes (12/65 up to 12/89 also with magnum rounds)

You need 2x M4x10 screws. Be sure not to be longer than 10mm. Maybe M4x8 can also work.

It should be printed upwards with a brim. This prevents the wings from breaking off.

Use PETG or stronger materials like PC.

Tagi