Reusable ToDo cards stand & felt items tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray for everyday items and a reusable cards stand, compatible with Deltahub (or just any sort of cards really)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modern reusable ToDo cards stand & tray
I really wanted to do my own version of a stand for reusable todo cards, as the versions already available were rather expensive to ship to my country. This one even offers more features than I could find in models already available.
Features
Three slots for sliding any sort of todo lists around (gap is 3 mm thick and 160 mm wide)
Groves to hold pens/markers
Tray (one can add felt to) for everyday items
Simple eraser for use with dry-erase markers
Recessed silicone feet slots for optional, more sleek and stable standing
In the picture there are not aligned properly, but this was fixed for the uploaded model
Felt
For the tray one needs 160x70 mm piece and for eraser 50x15 mm (for eraser there is a cutting template model available to help with getting the dimensions right). My felt was 5 mm thick, but for eraser anything thicker than 2 mm will work.
Printing
Model in the photos was printed using Bambulab PLA Matte Charcoal Black using 0.2 mm layer. For the feet slots and bottom of the eraser I did not use supports to have smoother surface for better adhesion with the glue later on.
If someone does not want to use recessed feet, one can enable supports there and just have a standard, flat surface for any other non-slip solution.
ToDo cards compatibility
I tested it with the Deltahub todo cards, but it will work with anything thinner than 3 mm really. In the end I plan to use with these cards from Amazon.