Children of Morta Board Game Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models for the CoM board game. The standard version only included a bad insert, which is why I decided to create some.
- Ocena
- 1,5 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 318
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Unfortunately, the game’s standard inlay is not very well designed. Cards tend to slide around, and the tokens are either loose inside the box or have to be stored individually in separate bags.
This bothered me enough that I designed a solution that can be taken straight out of the box so you can start playing immediately. All tokens are stored in two dedicated token holders. The four playable characters can be placed between the tokens, keeping them organized and always within easy reach.
All mini cards are neatly arranged sideways in the mini card trays. The remaining character cards also fit into these trays.
The medium-sized cards are stored in the final tray. To make them easier to remove, a small “rocker” mechanism is integrated at the bottom. Only the very large character cards are placed on top of the token trays. The bag containing the game contents (save state) goes on top of the medium-sized cards—there is plenty of space for it.
Everything is designed to work with sleeves (and of course without them as well). Have fun! 🙂
Everything was printed on a Sovol SV06 using:
PLA
Layer height: 0.32 mm
No supports
The images show multicolored parts because I used leftover filament from different spools for printing.
EDIT:
Added v2 for more Space in some parts of the Tray
EDIT:
Added 6-Player version of the NormalCardTray