1 / 2
Dry clutch for VKB T-Rudder pedals Mk. IV — zdjęcie 1
1 / 2

Dry clutch for VKB T-Rudder pedals Mk. IV

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dry clutch adapter for VKB's pedals. Similar to VKB Gunfighter's dry clutch

Ocena
0 / 5
Polubienia
26
Pobrania
315
Wydruki
0
Wyświetlenia
2780
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

I've seen a great idea on reddit, but there was no stl available. So here is a quick implementation of it.

You can see it in action here

You can try without spring, but to be honest feels a bit odd. With spring, however, these are awesome and give this extra smooth feel, allowing to have “pedal trim” closer to the center (about 50% of axis for me)

 

I have printed this in 0.2 layers on 0.4 nozzle with nylon. You would need an m3x14 or longer bolt to tighten this one up. You can try other materials, but without removing the spring or reducing the tention, it would be challenging to tighten it properly.

 

Version 1 is really a proof of concept and can give an opportunity to test your materials and printer. The sizes are tuned to my printer and nylon. If it doesn't work for you, there is fusion360 project attached, which should be enough to customize your needs.

Tagi