1 / 4
Mele miniPC + SVBony power hub Bracket for 30mm tripod center column — zdjęcie 1
1 / 4

Mele miniPC + SVBony power hub Bracket for 30mm tripod center column

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mele miniPC + SVBony power hub Bracket for 30mm tripod center column

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

Mele Mini PC + SVBony Power Hub Bracket

For 30 mm tripod center column with removable end cap (required for installation)

Compatible with photographic tripods that have a 30 mm diameter center column.

Secures a Mele Mini PC and SVBony Power Hub. Designed around a SLIK 700DX Pro tripod, Mele Cyber X1 Mini PC, and SV241 Pro hub, but compatible with other devices of similar dimensions.


Hardware / Materials

  • 2× M3 screws

  • 2× M3 nuts (or 2–3 small washers approx. 2.5 mm thick, for the back of the Mini PC base)

  • 1× M4 screw (one of the screws supplied with the SVBony unit works perfectly)


Assembly Instructions

  1. Secure the Mini PC:

    • If using nuts, loosely thread them onto the M3 base screws, then screw the assembly into the Mini PC.

    • If using washers, place them between the bracket base and the Mini PC before installing the screws.
      This preserves the air gap for circulation between the Mini PC rubber feet and the bracket.

  2. Install the SVBony unit using 1× M4 screw.

  3. Remove the center column end cap (it should unscrew), if present.

  4. Slide on the 3D-printed retaining collar cap, then reinstall the tripod’s end cap.

  5. Slide the mount onto the center column and secure it by tightening the retaining collar.