Tom By TomTom car mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
air-vent mount for Tom
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two-part 3D-printable holder that accepts the original TomTom magnetic car mount (the small magnetic plate that comes with the Tom device) and clamps onto a car air vent. It lets you avoid sticking the magnetic base to your dashboard. The two parts join with a printed thread — you can screw them together for adjustment and glue them for a permanent assembly.
Features
Holds TomTom “Tom” magnetic mount securely
Mounts to a car air vent (dash vent)
Two-part threaded design for easy assembly and optional permanent bonding
Designed for PETG (durable, slightly flexible)
Recommended printing settings
Material: PETG (recommended). PLA will work, but is less heat-resistant and less durable in cars.
Layer height: 0.16 mm (recommended)
Nozzle: 0.4 mm typical
Infill: 20–30% (grid or gyroid)
Perimeters / walls: 3-4 perimeters for strength