Snowskate Conversion Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skateboard to Snowskate Conversion Kit Don't let the winter stop you from skating!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 535
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Skateboard to Snowskate Conversion Kit
Don't let the winter stop you from skating! This 3D printable add-on allows you to swap your standard skateboard wheels for snow blades, instantly turning your deck into a snowskate. It fits directly onto standard skateboard trucks.
Hardware Needed:
8x Standard Skateboard Bearings (2 per blade).
Your existing skateboard hardware (axle nuts).
Print Settings:
Material: PETG (Highly recommended for impact strength and cold resistance).
Walls/Perimeters: 3 walls.
Infill: 30% (Use a strong pattern like Gyroid or Grid).
Quantity: Print 4 blades.
Assembly Instructions:
Press 2 bearings into the center hub of each printed blade.
Remove your current wheels.
Slide the blades onto the axles and secure them with your axle nuts.
That’s it - you are finished! Get out there and have fun cruising on the snow.
Here is a video of it in action! https://www.tiktok.com/@modularmapping3d/video/7597135434736602390