TetherTube Tilt for YakAttack BlackPak
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a remix of SteveMYoung's TeatherTube Tilt
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is technically a remix, but after finding several issues with the original model, I rebuilt it from scratch. The concept is solid, but the execution needed improvement.
This version corrects the screw sizing to match the #10 screws supplied with Teathertubes, enlarges the mounting holes accordingly, and uses proper 82° flat-head countersinks. The tilt models are 0.6" thick to prevent the 1" screws from protruding into the Blackpak.
A 0° tilt option is also included, allowing you to switch to standard vertical mounting without removing the printed tilt model.
Printed in PETG with 7% infill.