Pannier Wall Mounting Bracket (10mm tube)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounting brackets with hidden screw fixings suitable for 10mm tube / rod.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model
Bracket ends suitable for mounting 10mm tube to neatly store pannier bags on walls or doors (tested with Ortleib bags).
After searching for an existing design I struggled to find something without visible mounting hardware or (what I consider) unaesthetic edges so I designed this in FreeCAD (file included) see influences below.
The screw holes are chamfered for countersunk screws.
The tube recess and mounting interface are sized for a little forgiveness in tolerances.
Printing
I printed without supports in PLA with the face that faces the wall on the print bed at 0.1mm layer height for my preferred finish. Bridging was not an issue for me but I prefered to have the side that was printed hidden from view.
Influences
The overall design was influenced by the following models;
The hidden fixing in this model is a simplified version of the one in the following model;