ME - Laser CNC - Fixed X-Gantry mount parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
***UPDATE*** These parts are for the V1. Edgar has updated the design to address these issues in V2.
Edgar has a great design here, but I ran into a number of issues with it when the parts were printed.
Notably, the holes for the stepper bezel were not large enough to fit it. I increased the sizes for the holes to fit the stepper flush to the part.
To print the right side of the X_Gantry_Outer_Mount_Plate_Left mirror it on the X-Axis when slicing.
Another Note:
You will need M3 heat set threaded inserts to secure the belt tensioner, there is not enough material for an M3 screw to bite into to hold it down securely.
Inserts: https://www.adafruit.com/product/4255
Solder Iron Tip: https://www.adafruit.com/product/4239