BOLTBRIDGE Hardware Mount (skateboard wall mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The BOLTBRIDGE™ is a minimalist, high-tolerance wall mounting system designed to turn any skateboard into floating art.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Product Description
Transform your skateboard into a piece of gallery art. Unlike traditional mounts that grip the wood or hang from the wheels, the BOLTBRIDGE™ interfaces directly with the deck’s pre-drilled hardware holes.
This design uses high-tolerance pegs that mimic the diameter of standard skateboard bolts, providing a friction-fit connection that is both easy to install and incredibly sturdy. Whether you are displaying a limited-edition pro model or your retired daily skater, the BOLTBRIDGE™ keeps the focus entirely on the graphic, hiding the mounting hardware completely behind the deck.
How to Use
Prepare the Deck: Remove the trucks and hardware from the skateboard. Ensure the mounting holes are clean and free of grip tape debris.
Wall Installation: * Locate your desired display spot (preferably into a wall stud).
Insert a #6 ANSI inch screw through the central countersunk hole of the BOLTBRIDGE™.
Drive the screw into the wall/anchor until the bracket is flush and the pegs are level.
Note: Do not over-tighten if using 3D-printed materials to avoid cracking the bridge.
Mounting: Align the two inner hardware holes of your skateboard with the BOLTBRIDGE™ pegs.
The "Snap-In": Firmly press the board onto the pegs. The high-tolerance design is intended to grip the inside of the holes for a secure, wiggle-free fit.
Final Look: Your board will now sit slightly off the wall, creating a clean "floating" shadow-box effect.
Technical Specifications for Users
Hardware Required: 1x #6 ANSI flat-head wood screw or drywall anchor screw.
Mounting Style: Dual-peg friction fit.
Compatible Decks: All standard 4-hole skateboard patterns (Old School and New School).
Material Recommendation: For best results, print in PETG or PLA+ with at least 5-6 walls for peg rigidity and 25% infill.
Support: Automatic.
Don't be like me, attach it to a stud so it's levelled. Feedback will be appreciated as it's my first public part! Thanks!