HT-S2 Skeletonized Mod V1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A skeletonized version of the G-Wolves HT-S2 shell based on my finger placements inspired by the Zeromouse.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small project I made to try to design a skeletonized fingertip mouse that properly fit my hand. It's based off of my grip points on a fingertip mouse which are pretty unique so this mouse won't fit everyone. The final weight is around 22g with the scroll wheel and mouse feet although using grip tape will make the mouse easier to use if your surface finish isn't perfect.
I plan on creating a more versatile version that supports a less obscure pcb in the future, this is just what I had on hand. I plan on cutting down weight further in later revisions.
Print horizontally with tree supports for best results on an FDM printer. I used ABS but other materials should hold up just as well.
Fitting the PCB in is a bit tricky. You have to insert it from the bottom and move it around to get it into the correct position. The front two screws are hard to access, but I plan on remedying this in later designs.