Nicole Wood Easel Bin Back Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nicole Wood Easel Bin Back Plate
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
My son said he accidentally sat on it after falling off a sofa... Don't ask questions - I didn't see it happen. Well, time to fix it. Unfortunately there are a couple odd angles on this wood piece and I don't have a table saw or access to one and I'm not attempting this with a circular saw. Time to engage the 3d printer again...
This is a set of 3 pieces - pieces are 9.41" / 239mm long each. (I tried to make it so it would print on smaller build plates, but I don't think I succeeded.) There is a right and a left piece as well as one center piece to join them together and add additional support (I did add screw holes to the center piece after I printed mine - there was a little too much downward flex for my liking)
This was made to re-use all the original screws. I grabbed four #8 x 3/4" wood screws to attach the center piece. You'll probably want a total of six though.
Print in your choice of color[s] (or your children's choices - see my images as an example) I printed in ABS with pieces flat on the build plate. Center piece on the side. 25% infill & 5 walls was probably a bit overkill - feel free to adjust to what you want.