Packout Low-Profile Insert For Gearwrench 10-piece Ratcheting Wrench Set (Inch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for Milwaukee Packout slim low profile organizer for 10-piece Gearwrench ratcheting wrench set 1/4" to 3/4".
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I got tired of my wrenches rattling around a metal toolbox and having to sort through the toolbox after hauling that 20-kilo toolbox around when all I wanted was the wrenches, so created this for Milwaukee Packout organizer.
This configured for the Gearwrench 10-piece inch ratcheting wrench set. It might hold other brands of ratcheting box end wrenches with some tweaking.
Stay tuned for the metric version, coming Real Soon Now.
Some notes...
I printed this in PLA on a Snapmaker U1. Used PLA because I was running out of more suitable filament - if your tools see more sunshine than mine do, you'll definitely want to use something more heat tolerant.
The open slots in the bottom for the three largest wrenches are needed to provide clearance for the fat ends of those wrenches. It got pretty tight, especially for 5/8" wrench, which wasn't quite long enough to reach the middle pocket in the organizer. If you try this with other brands of wrench, check carefully to make sure the fat ends don't interfere with organizer lid. The lid wi'll bend a bit to accommodate a wrench that sticks one or two mm too high, but it doesn't like that in the long run.