1 / 2
Milwaukee M12 Battery mount for Pelican Trekpak
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model to organize an M12 battery in a Pelican case with TrekPak.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This print keeps your M12 1.5/2.0 batteries organized in a Pelican case with TrekPak dividers. I designed it for DIY TrekPak with 4mm coroplast and 2mm foam, so it may need to be tweaked slightly if you have different dimensions. Designed to print upside down with no supports, but YMMV. Not tested on the M12 2.5 batteries, but will likely work.