1 / 6
FLAGPOLE MOUNTING RINGS - ANTI-FURL SWIVEL — zdjęcie 1
1 / 6

FLAGPOLE MOUNTING RINGS - ANTI-FURL SWIVEL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

360 Degree Rotating Flagpole Flag Mounting Rings or Spinning Flag Pole Kit - Easy Print!

Ocena
5 / 5
Polubienia
15
Pobrania
103
Wydruki
1
Wyświetlenia
308
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This spinning flag mount is designed to prevent your flag tangling around the pole.  

It's a fairly robust design intended for 25mm or 1" diameter poles - a screw is required to fix the parts in place.  I prefer to use zipties to hold the flag, but caribineer clips or flag clips will work happily.

I suggest running a small slice as a check print and adjust the diameter if you wish, but be sure to scale all the parts equally in your slicer.

I have printed the mount parts in PETG 20mm layer height and the ring in Prusament PC Blend with five perimeters for a little more reassurance.  We use 25mm electrical conduit as our pole so it's unlikely that the ring  will break before the pole!

Tagi