Cateye HL-EL130/135 Bicycle Light Mount modified to parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric mount allowing to put the light anywhere I want.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to mount my (very old) Cateye HL-EL 130/138 not to the handlebars, but to the handlebars stem. Since the stem is at an angle, this needed to be angled as well. So there are 4 distinct parameters of the model:
CLIP_TO_BAR_ANGLE : angle between the mounting bar axe and the light axe. 0° for the stem, 90°for the handlebar. Or any of your choosing.
CLIP_TO_HORIZON_ANGLE: only makes sence if the CLIP_TO_BAR_ANGLE is not 90°(then this can be done simply by twisting the mount on the tube). For the CLIP_TO_BAR_ANGLE = 0, this is the angle of the stem bar to be compensated.
TUBE_DIAMETER : diameter of the mounting tube
CLIP_HEIGHT = how high from the tube the light clip should be.
Use zipties to hold to the bar. I reccomend putting some piece of rubber (old tube) between the mount and the bar for better friction.