Duet3d 6HC electronics case for Pulse/Prusa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan cooled Deut3D 6HCMB case for D-frame printers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Duet3D 6HC electronics case for Prusa/Pulse D-frame printers. Case mount allows the use of the large 6HC and the original D frame mount holes.
This version uses a 120mm thin fan underneath the main board to cool the steppers.
I am currently using this case on my Pulse XE with the Duet3D 6HC. I will upload the config to my Github as time permits and I get the config more refined.
I have updated the base so that it misses the lower D frame brace on the Pulse XE
Designed by M Hathaway and Constantijn Crigen
Print petg, abs, asa, any. 25% infill aligned rectagonal, cubic, any.
M4mm inserts (optional)
Fan used: Noctua NF-A12x15 PWM - 120x15mm
Firmware below is for the mini 5+, however will work on the 6HC as well.
Please leave a "Like", it helps me. Thank You!