Don't Tip the Van! - Physics Balancing Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fun balancing game in the theme of a roadtrip
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, this model is a fun balancing toy for family and friends. It is in the theme of a overpacked trip.
Rules
The goal is to pack as much items on the car without it tipping over. The more items you can put on the car, the better. If you are playing with friends, you take turns stacking items on the car until someone crashes the car.
Specs and Features
Round disk on the bottom of the car to make the game hard and challenging.
Chamfered places on the car for 3d printability.
pattern on surfboard
fin on surfboard
wheels have a cool pattern and shape
box has stripes
suitcase has a handle
Items
There are a assortment of items that you can put on the car.
The items include:
Tire
surfboard
vintage trunk
suitcase
More coming soon!
Car assembly
The car is split into two parts, the car, and the roof rack. Print them separately. There are four holes in the car ceiling that is for hot glue to glue the roof rack to the car. If you don't want to use hot glue or don't have hot glue, you can print the car without the holes.
Print orientation
The models are already orientated for 3d printing.
Print settings
Since the top half of the car is hollow, there will be a shrink line. For the car, I recommend at least three wall layers to prevent and reduce the shrink line.
Car
At least 3 walls
5%-15% infill(do not go above 20%)
3-6 top bottom layers
0.16 or 0.2 layer hight(0.16 will print the disk on the bottom better)
VERY IMPORTANT SETTINGS
NO SUPPORTS!!!
The more TOP layers you have, the more easier the game will be. I reccomend you start with 15-30 TOP layers
Surfboard
For the surfboard to achieve the color split, you can manually or automatically pause the print on your printer and load another filament. This model requires good bed adhition.
Just your normal print settings will do
Vintage trunk, suitcase
These items do not have any specific print settings you have to apply.
Tire
This model has little area that touches the bed. It also has a pretty steep overhang. If your printer is bad at printing overhangs, print the little overhang version.
How much luggage did you pack?