Triple AMS HT Holder (X/P Series)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This AMS HT holder not only raises the glass lid, but also allows you to hold up to 3 AMS HTs!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This triple AMS HT holder not only raises the glass top to any X/P series printer up a little, but it also allows for 3 AMS HTs to fit snuggly on top of your X/P series printers while making it look clean! The glass panel fits snuggly underneath the HT and allows the weight to be evenly spread across the glass. This is a perfect edition to any “Industrial” setup that would allow for many drying possibilities!
*NOTE*
The P2S hasn't been tested with this yet, so print at your own risk.
Some sanding for pins may be required
I'd recommend using superglue to ensure pieces stay together
I'd also recommend using PETG, ABS, or something else strong for the print itself because of its fragility
Update 3/22/26
Updated old 3mf and added a new 3mf file has been added with my personal settings that I used on the V2 model.