Modular Chess Board | Interchangeable Tiles & Fast Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully modular chess board with interchangeable tiles. Print a full set in under 24 hours and customize your colors
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Welcome to the Modular Chess Board V2. This project was designed with two main goals in mind: total customization and printing efficiency. Whether you are a chess enthusiast or looking for a quick, satisfying print project, this board allows you to mix and match colors without needing to reprint the entire frame.
✨ Key Features
Fully Interchangeable Tiles: The board features a "snap-fit" tile system. This means you can easily swap colors whenever you want. Tired of Black vs. White? Switch to Purple vs. White simply by printing a new set of tiles, not the whole board!
Fast & Lightweight: The design is optimized to save material and time.
Performance: The entire set (board + tiles) was printed in less than 24 hours on a stock Ender 3.
Modular Assembly: The frame consists of four identical quarters that interlock to form the full board.
📂 Files Included
QuarterChessBoard.stl: The frame structure.Quantity to print: 4
ChessTile.stl: The individual squares.Quantity to print: 32 (Color A) and 32 (Color B).
⚙ Printing & Assembly Notes
Tolerances: The model has been designed with built-in tolerances for a snug fit.
Note: I did not need to use "XY Hole Compensation" or "Horizontal Expansion" settings on my printer. However, results may vary depending on your printer's calibration, I recommend printing one Quarter Board and a couple of Tiles first to test the fit for your specific machine.
Supports: No supports are needed.
Infill: 15-20% is sufficient for durability.
Material: i use PLA, but PETG can be better because the friction of the pieces (but i didn't test it).
🚀 Future Roadmap
This is currently the first Version. Depending on the community reception and feedback, I have plans to upgrade the design. Future updates may include:
🧲 Magnet Support: Embedded slots for magnets for a premium feel.
📦 Storage Solution: A custom box or case to store and transport the disassembled board.
🎒 Portable Version: A travel-friendly iteration.
If you like this model, please leave a Like and post a Make! Your feedback encourages me to work on the upgrades mentioned above.
Happy printing!
References :
Chess Set -
Inspiration Model :