1 / 1
Aircraft Six Pack Gauges Running on 4-inch LCD Screen for Flight Simulation with 3D Printed Case and Stand — zdjęcie 1

Aircraft Six Pack Gauges Running on 4-inch LCD Screen for Flight Simulation with 3D Printed Case and Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Aircraft Six Pack Gauges Running on 4-inch LCD Screen for Flight Simulation with 3D Printed Case and Stand

Ocena
0 / 5
Polubienia
9
Pobrania
42
Wydruki
0
Wyświetlenia
617
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

I started this project to build my own six-pack gauges for flight simulation, but I used a 4-inch LCD screen instead of 3D-printed physical parts and stepper motors because I don’t like the noise they generate.

The display is a 4-inch LCD display with an integrated ESP32 S3 microcontroller. It runs as a Mobiflight (https://www.mobiflight.com/en/index.html) custom (aka community) device, integrated with flight simulators such as X-Plane and MSFS.

I have also included a case and stand for the LCD display.

Pre-requisites

  • Knowledge/experience with Mobiflight (https://www.mobiflight.com/en/index.html) is required, as this runs as a Mobiflight community device

  • You should be able to configure additional Mobiflight boards and add encoders to control things such as the True Airspeed (TAS) knob in the Airspeed Indicator, Heading Knob in the Heading Indicator, and Baro Knob in the Altimeter. Encoder configuration in Mobiflight is beyond the scope of this document. Please see here for detailed instructions on Mobiflight configuration: https://docs.mobiflight.com/

Bill of Materials

  • 3D printer and filaments. I printed mine with PLA, 0.4 mm nozzle, 0.2 mm layer height

  • Guition Esp32-s3-4848s040 4-inch LCD screen

  • EC11 encoders to be used for knobs to control the TAS knob, Heading Knob, etc.

  • Additional Mobiflight-supported boards (Arduino Nano/Uno, RP2040, etc.) to connect the encoders. For details, see here: https://docs.mobiflight.com/boards/.    

  • USB Type C cables

  • USB Hub to connect the devices to your gaming PC

  • Wires, soldering materials, etc., to solder the encoders to your Mobiflight board

Credits: The EC11 (Rotary Encoder) knobs are from here: https://www.thingiverse.com/thing:4206617

Please see the detailed Build Guide that is uploaded together with the 3D models.

Tagi