Drill Sharpener Jig for Work Sharp Ken Onion Mk.2 Blade Grinding Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill Sharpening Jig (118° drill point angle and 15° relief angle) for Work Sharp Ken Onion Mk2 BGA.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This drill bit sharpening jig is based on the original design by @JackFrost
(https://www.printables.com/model/78321-drill-sharpener-jig) and has been redesigned and adapted for use with the Work Sharp Ken Onion Mk.2 Blade Grinding Attachment.
Features
Standard 118° drill point angle
15° relief angle
Designed to fit the Work Sharp Ken Onion Mk.2 Blade Grinding Attachment 90° Grind Plate
Optional screw mounting for improved stability
CAD file included for custom modifications
Installation
The jig is installed on the 90° Grind Plate by replacing the original plastic platform with this printed part.
A hole for a 3 mm screw is included at the rear of the jig if additional fastening is required. This may be useful if your 3D printer does not produce very accurate dimensions.
If screw mounting is used:
Drill a 3 mm hole in the aluminum attachment for a screw and nut, or
Drill a 2.5 mm hole and tap M3 threads directly into the aluminum housing.
Print Settings
Material: PETG
Infill: 100%
Print orientation: Tilted 90 degrees
Supports: Standard supports enabled