Target Stand for 1x2 Furring Strips (USPSA Style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Target Stand for 1x2 Furring Strips (USPSA Style)
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a target stand I made for 1x2 furring strips.
It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274
The only functional differences are my part is more light duty, uses about half the material depending on print settings, and there are no screw holes. I've never broken one, and I value the faster print time and lower cost.
I also included a little wedge you can put in each slot to hold everything together with a friction fit. With the wedges, you can put it together in seconds and it wont wobble.
v3 uses slightly less material than v2 and the bridges are shorter. They both work fine, I have a bin full of both versions and use them interchangeably.