Cartridge Brace/Clamp for Nevermore Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brace/clamp that push fits onto the front of the Nevermore Mini to keep the cartridges from falling off.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a brace/clamp/clip thing that simply push fits onto the front of the standard size Nevermore Mini (see link at bottom of description) and fastens down using the top two screw holes connecting the front plate to the base part of of the Nevermore Mini. It is designed to fit snugly (matches the curvatures of the Nevermore Mini) but should be easy to push on.
This is intended for those who have cartridges that don't feel very secure with just magnets, and guarantees that the cartridges won't fall off the sides of the Nevermore Mini during strong accelerations etc.
A huge thanks to Nevermore 3D for such a brilliant air filtration system!
Parts List
2x M3 10mm Socket Cap Head Screws (replaces 2 of the 4 M3 6mm Button Head Screws used to fasten the front plate onto the Nevermore Mini base)
Instructions:
Print 1x Nevermore Mini Cartridge Brace
Remove the top two screws from the front plate of your Nevermore Mini
Push fit the Nevermore Mini Cartridge Brace onto the front of your Nevermore Mini, making sure that the lip at the back of the cartridge brace sits nicely on top of the lip of the front plate of the Nevermore Mini.
Fasten the brace onto the Nevermore Mini using the 2x M3 10mm Socket Cap Head Screws
Recommended Print Settings (Snapmaker U1):
0.2mm layer height
0.4mm nozzle
ASA or ABS (something that won't distort at temperature)
15% infill (cubic or similar)
Supports everywhere