MHP LMG alt parts + hardware list
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some mods to increase reliability and longevity of the blaster and make it compatible with worker flywheels
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ever since I've built this blaster I've been constantly making changes in some parts to make the blaster much more pleasant to use and to service. Now it feeds 100 round belts with zero skips on lightly used worker gen 3s. Brand new gen 3s are still a bit of a problem, but I think that it would be a really easy fix.
Here's the firing demo:
These results were achieved using my wider links, specifically 12.9 ones. You can find the files in my profile. Also the rate of fire on my LMG is not too fast, so be aware that this hardware might not be suitable for higher rates of fire, but maybe it would still be a good starting point.
Here's the hardware list, specifically the springs and additional hardware for my files:
BASIC HARDWARE (SPRINGS):
safer bolt pusher spring - 9x0.6x65 (maybe a higher wire diameter will make it launch even brand new gen 3s)
bolt return spring - one 6х0.6х25, one 5x0.4x35 extension springs
belt retainer - 8х0.4х25
pawl - 8х0.4х19
bolt cam (use the second photo as a reference):
1 - 7х0.5х44
2 - 7х0.5х37
3 - 7х0.5х33 (mine seems much stiffer than the other ones, so use 0.6 or wider wire diameter)
4 - 6х0.6х26(27)
bolt lug - three 6х0.6х25 extension springs
HARDWARE SPECIFIC TO THE PARTS I CHANGED:
one 683zz bearing
5 M3x5x5 heatset inserts
4 worker smooth black flywheels in case you want to use my cage
NOTE: the parts are (mostly) NOT PRE-ORIENTED.