1 / 4
Bike speedo holder for keychain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bajonet holder for Sigma bike speedometers - you can remove your speedo after riding and attach it to your…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
This is a bajonet holder for Sigma bike speedometers - you can remove your speedo after riding and attach it to your keychain.
As it is based on a bajonett system there are some overhangs - you do NOT need any support as you only have to remove (break away / cut / ...) the inner ring after printing.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15mm
Notes:
print without support - everything is already included and can be removed easily with a knife!
Category: Sport & Outdoors