1 / 9
Onstep V5 to Celestron CG-4 EQ clip on mount — zdjęcie 1
1 / 9

Onstep V5 to Celestron CG-4 EQ clip on mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Onstep V5 controller mount for Celestron CG-4 EQ mount

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
140
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I just recently added a Terrans Industry Onstep V5 Goto controller to my Celestron CG-4 Equatorial Mount and didn't like that it was held in place by a velcro strap. I ended up modeling this clip on mount in Fusion 360, couple of test prints later and it fits snugly without being to tight. 

I am not sure if this would work for older versions of the onstep controller.

I printed it in ASA 3 walls/ 3 tops layers / 3 bottom layers and 25% cubic infill

I used M4x12 socket head screw for the mount.

I am sure PETG would work too. Just print it in something that has a bit of flex to it.

Let me know if you have any questions. 

Tagi