Vex Wheel Adapters for Mr. Baddeley's Printed Droid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm building Chopper so that's what they're made for. You can likely get them to work with others by adjust lengths.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I'm building a Chopper droid and the Vex omni wheels specified in the plans are out of production. I instead got the Vex 3.25" (260mm Travel) Omni-Directional Anti-Static Wheels part number SKU: 276-8026. Instead of the printed axle shaft I designed these to use an M6x80 bolt. The Vex wheel is kept centered by the printed parts and the bolt provides a far stronger axle. The design allows the wheel with the square bore to ride on the round bolt.
I suspect these will work for other droids if you adjust the widths. If not, hopefully they provide some ideas for how to adapt these wheels to your droid.