Protective Cover for Brass Wire Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple protective cover for a small brass wire brush. Designed to prevent damage to fingers, toolboxes, and surroundin
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a friction-fit protective cover for a handheld brass wire brush.
The cover is designed with a slightly angled top, making it higher at the front and lower at the back. This allows the cover to be slid on easily while still staying in place without clips or locks. The bristles gently press against the inside, creating enough friction so the cover does not fall off during storage.
The design is intentionally simple and robust:
No moving parts
No supports required
Easy and fast to print
Material: PLA or PETG
Layer height: 0.2 mm
Infill: 15–20%
Supports: Not required
Orientation: Print with the opening facing up