The Flip: 2-in-1 Reversible Candle Holder (Tealight & Taper)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a minimalist, dual-purpose candle holder designed to be versatile and clean.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
The geometry allows it to be used in two different orientations:
Flat: Holds a standard tealight candle.
Upright: Holds a standard taper candle.
The design features smooth fillets and a continuous curve profile, giving it a soft, modern feel that fits well with any decor. It’s perfect for dining tables, desks, or as a simple accent piece.
Print Settings
Material: PLA, PETG, or ABS. (Note: Since this is near a heat source, PETG or a high-temp PLA is recommended if using real candles).
Layer Height: 0.2mm or finer for a smoother finish.
Infill: 15-20% (Grid or Gyroid).
Supports: Minimal supports may be required depending on your printer's bridging capabilities, but it is designed to be printer-friendly.
Walls: 3 perimeters recommended for a solid, weighted feel.
Design Notes Designed in Fusion 360 with a focus on clean lines and multi-functionality. The internal geometry allows the taper candle to sit securely when upright, while the tealight cup is perfectly sized for standard tea candles when lying flat.
⚠ Safety Disclaimer If printing in standard PLA, please be aware that the heat from a burning candle can deform the plastic.
Recommended: Use battery-operated LED candles for complete safety.
If using real candles: Never leave them unattended and ensure the flame does not burn down to the plastic level. Consider using a metal insert cup for the tealight.