3M bayonet filter cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a long-running debt for the community: I made a halotherapy mask 2 years ago and I used a 3M mask as a base and…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 679
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a long-running debt for the community: I made a halotherapy mask 2 years ago and I used a 3M mask as a base and had to buy original filter cartridges. Howto is here: https://www.instructables.com/id/Halotherapy-Mask/
But sacrificing a totally new filter cartridge is waste.
Long story short: the covid-19 pandemic came and I ran out of paper masks, so HAD to make a 3M bayonet compatible custom filter. I already tested it, 4 layers of industrial filter fits great. ~4 hours of print time per cartridge.
Oh, and you can replace the filter and disinfect the case, since it's reusable! You don't have to glue the parts together, just sandpaper the edge until it fits!
Thanks 7eggert for the fitting, it works great!
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.4
Category: Parts