1 / 4
Shure SM7B SM 7B Adapter 90° 90 Degree Turn Adapter e.g. for Rode PSA 1 — zdjęcie 1
1 / 4

Shure SM7B SM 7B Adapter 90° 90 Degree Turn Adapter e.g. for Rode PSA 1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little piece to adapt the notches to turn the mount of the SM7B 90 degrees, so that the output jack is oriented 90…

Ocena
0 / 5
Polubienia
6
Pobrania
33
Wydruki
0
Wyświetlenia
758
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

A little piece to adapt the notches to turn the mount of the SM7B 90 degrees, so that the output jack is oriented 90 degrees turned, because I had problems with the clearance with my boom arm but theres more than enough space on the "underside".

In order to being able to unscrew the long screw holding the assembly together you have to disassemble the two knobs on the mic (reassambling needs a bit of fiddling and time, rember the order of washers!) and then unscrew the long screw holding the holder in place. Put the adapter in and assemble everything back together.

Print without support, the overhangs might need minimal cleanup.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

50%

Filament: DasFilament PLA Black Matt

Category: Music

Tagi