Philips Hue Lighstrip Plus Outdoor Cases & Mounts V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hier sind alle benötgten Komponenten um den Philips Hue Lightstrip Plus im geschützten Außenbereich zu betreiben.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hier sind alle benötgten Komponenten um den Philips Hue Lightstrip Plus im geschützten Außenbereich zu betreiben.
Ich verwende alles für die Terasse, installiert unter dem Dachüberstand.
Also recht gut wettergeschützt.
Die Nacharbeiten beschränken sich auf das anpassen der Bohrungen.
Je nachdem ob man Einschmelzmuttern (wie ich) oder selbstschneidende Schrauben verwenden möchte.
Schreibt mich an, falls noch Fragen auftauchen.
And here is the machine translation.
Here are all the components required to operate the Philips Hue Lightstrip Plus in a protected outdoor area.
I use everything for the terrace, installed under the roof overhang.
Well protected from the weather.
The rework is limited to adapting the holes.
Depending on whether you want to use meltdown nuts (like me) or self-tapping screws.
Write to me if you have any questions.
These parts are all you need to mount the philips hue light strip plus in an outdoor area.
I installed them mounted at an roof overhang.
Post prossesing is limited to customize the holes.
It depends on whether you use melt-in nuts (like i did) or self-cutting screws.
If there are any questions, feel free to PM me.
Print instructions
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.1 - 0.2
Infill: 20% Honeycomb
Notes:
Außer für den Halter für das Verbindungskabel (CableHolderFinal.stl) vom Lightstrip zum Netzteil werden keine Supports benötigt.
Für den Außendereich habe ich alles in PET gedruckt.
Except the CableHolder.stl, no supports are needed.
I used PET for the outdoor-area parts.