Sharpie Holder with 10x3mm Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
@AzJake's magnetic sharpie holder but accommodates three 10x3mm magnets because that is what I had around.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I edited @AzJake's magnetic sharpie holder to accommodate three 10x3mm magnets because that is what I had.
I made the three magnet holes 10.25mm x 3mm because I hate when friction fitted magnet holes or the magnets have tolerance issues and you can't fit your magnet in causing the whole print to be a failure. I also don't like friction fitted mounts because they often aren't that strong against the force of you remove the item from the ferrous surface so they tend to just stay on the ferrous item leading you to end up adding super glue anyway.
All in all, friction fitted magnet mounts are not that good of an idea. That is why these magnet mounts are 0.25mm larger than the 10mm diameter magnets they are designed for. The magnets should slip in easy but can be removed easily. One needs to use some sort of adhesive such as two part epoxy or superglue to ensure the magnets stay in place within the print.
Finally, the .sldprt file was made on Solidworks Maker's edition. If you don't have Maker's edition I don't think you'll be able to open it due to Solidworks restrictions. I included the .step file. You can easily use the feature recognition tool on it. It worked flawlessly when I did it.