1 / 3
Smoke Stopper with switch and G4 socket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for Li-Ion powered electronics up to 4S
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Additional parts needed:
- XT60 female & male plug (The cheap ones without a cap and a recessed rectangle on both sides)
- G4 socket (17mm diameter, pre-wired, with 2 holes for screws)
- G4 bulb
- rocker switch (mounting hole is 19.5 x 13.2 mm)
- (3x) M3x16 bolt
- (3x) M3 nut
- (4x) M3x10 self-tapping button head screw
USE AT OWN RISK!
That's why I won't give any assembly instructions. If you know what you're doing you will figure it out easily.
I added .iges and Fusion 360 source files so you can customize it.
The pictures are from an earlier version. I did some improvements to the parts after I printed it.
Print Settings
Rafts:
Doesn't Matter
Resolution:
0.1
Infill:
50
Notes:
Optimized for 0.4mm nozzle, 3 walls, 8 Top/Bottom, 0.1mm layer height.
Print parts as orientated originally.**The Head needs supports** (touching build platform only).
Category: Hobby