Replacement case for Transcend Jetflash 770 USB 3.0 flash drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So the case for my flash drive broke and I designed my own. It has some honeycomb openings for cooling and better…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
So the case for my flash drive broke and I designed my own. It has some honeycomb openings for cooling and better grip. It also has an eyelet to attach to a string or key chain.
I put my name on the base of my personal flash drive. That way I hope to get it back fast if I lose it. I added the .stp file so you can individualize it easily.
The housing is 0.3mm bigger on the inside than the electronics what resulted in a snuggly fit when I printed it on my machine - no free play after bonding.
Print Settings
Printer:
Tevo Tarantula i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Designed for 0.4mm nozzle
Step 1: Put the flash drive electronics in the base
Step 2: Glue the lid to the base
Put the lid on the base without any glue first. Then put some instant adhesive in the gap between the lid and the base on the long sides. Tiny amounts are sufficient! If you print this in ABS I think ABS glue/slurry might be the better choice.
When printed in PLA you can wipe off excess instant adhesive with acetone.
Category: Replacement Parts