Parkside SCREWABLE battery adapter 20V power plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed adapter for LIDL Parkside 20V battery that turns it into portable power source. There is no need to use glue
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 236
- Wydruki
- 0
- Wyświetlenia
- 1536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
📝Description
This is a 3D-printed adapter for the LIDL Parkside 20V battery that turns it into a portable power source.
Thanks to the use of a custom-designed clamping mechanism, there is no need for glue to secure the connectors, allowing for a clean, reliable, and service-friendly assembly.
Check also gluable version:
You can use it in your DIY projects or with my projects shown below.
simple cover | |
Cover with place for wago 221 clamps | |
Cover with buildplate | |
maybe your idea will be next? | STILL IN PROGRESS |
🛠 This project is still a work in progress. I’m happy to receive suggestions for modifications and further development, and I will be adding new compatible solutions in the future. | |
📦 Bill of Materials (BOM)
Item | Quantity | Description | Image |
|---|---|---|---|
1 | 2 | M3 × 14 mm socket head screw |  |
2 | 4 | Heat-set inserts M3 × L4 × OD5 |  |
3 | — | 18 AWG silicone wire |  |
4 | 2 | 6.3mm crimp wire male terminal |  |
🔧Printing & Assembly Note
The assembly process is not difficult, but following the correct order makes it much easier and helps avoid mistakes.
Detailed step-by-step instruction is avaliable to download in files section.
The plug stays in place with the force of friction.
Ideally, print it with 100% infill. There is no need for using supports.
⚡Safety note
Please keep in mind, that Parkside 20V Battery DOES NOT have build-in undervoltage protection, so it's not a good idea to use it as a power source without any protection.
Despite the relatively low voltage, this project involves electrical connections, including Li-Ion batteries capable of storing large amounts of energy.
Depending on the materials used, print quality, electrical connections, and assembly method, there may be a risk of fire, short circuit, overheating, or electric shock.
Before starting any work, make sure that you have sufficient technical knowledge and experience in working with electrical systems and batteries. If required by local regulations, ensure that you hold the appropriate qualifications or permissions.
Always use proper insulation, adequate wire gauges, and suitable protective components (such as fuses or circuit protection) when integrating this adapter into a project.
The author assumes no responsibility for any damage, injury, or loss resulting from the use, modification, or misuse of this model.
📌🔒❌✅