Atomos Blade Loupe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model This is a loupe for the Atomos Samurai Blade which uses components from a GGS 3X Loupe. The only real issues is…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Model
This is a loupe for the Atomos Samurai Blade which uses components from a GGS 3X Loupe.
The only real issues is that it does not fully cover screen and should be redesigned with 2X Optics.
This description is a work in progress and the installation guide will be added later.
Print Settings
Print this with any sturdy black filament to increase strength and minimise reflections inside the loupe. Supports are needed for the hinge but are not needed on the inside of the loupe.
Parts needed
(1) GGS 3x Loupe
(2) 22mm M3 Countersunk Screw
(3) M3 Threaded Insert
Installation
Disclaimer
This project does not have proper installation instructions, if you are considering printing this you will probably be able to work out the assembly.