Creality K2 Combo (not plus) Waste Shoot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collects waste or poop from the back of the k2 combo non plus
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
K2 Combo Waste shoot uses 6x2 mm magnets hot glued to secure it to the side of the printer box only needed as my table that its on isn't long enough for it printed in PLA printed on a K2 combo
Has a optional door for the collection bin makes it easier to get the waste out
NOT FOR PLUS MODEL
How to assemble:
Step 1: Put small amount of hot glue in the magnet hole.
Step 2: Press magnet into hole.
Step 3: Wait for it to dry
Step 4: Position clip over waste shoot on the back of printer
Step 5: Attach in main shoot
Step 6: Position bin bellow shoot (there is supposed to be a gap between them to allow it to loose speed
Printed on these settings:
Printer: Creality K2 Combo
Material: PLA
Supports: Tree from baseplate
Hot end: 210C
Build plate: 60C
Infill: 20%