Playmobil Farm Corral - fence post and fence rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old school Playmobil farm set came with fence posts and fence rails. Over time they get lost. Restock today.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
Over time the Playmobil farm set ended up with more animals than pastures. Here's a faithful recreation of the original fence posts, and a 3D-printer friendly version of the old school fence rails. The farm is restocked, and the kids are back at it.
To print:
Fence Post - to get an exact copy that is compatible with the original fences and the new ones as well, print vertically, set perimeters to 2, infill to 0% and 5 bottoms with no top. For a really nice print, turn on organic supports (one small area on each side can use the help). This model (greeen in the prints) gives a faithful rendition of the originals (light brown in the pictures). Use PETG because it needs to flex and be able to be tossed in the dishwasher to clean.
Fence Rail - print laying down. 100% infill, 2 perimeters. Pick a nice fence like color (dark brown in the pictures). These are not exact copies as the original was injection molded. These are designed to be printed flat. They "click" into the fence posts like you would expect, but are a little easier to put together than the originals which can be frustrating for the small ones.
Have fun farming!