Centauri Plate Vault | Modular PEI Storage for Elegoo Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under-printer storage for 5 PEI plates. Designed for Elegoo Centauri Carbon. Snap-fit assembly, no supports.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Function:
The Centauri Plate Vault is a precision-engineered, horizontal storage solution designed to house up to five PEI build plates. It is specifically optimized to utilize the vacant space beneath the Elegoo Centauri Carbon (when equipped with anti-vibration feet), effectively turning unused area into an organized storage hub. The plates are stacked vertically with sufficient clearance to protect surface coatings while maintaining a compact footprint.
Components:
2x Side Rails: Identical components featuring integrated snap-channels.
1x Rear Frame: Includes a structural backstop and an entry ramp for plate alignment.
1x Front Frame: Features dual vertical retention flanges to prevent unit displacement.
Technical Specifications and Printing Parameters:
Target Plate Dimensions: 259 mm x 261 mm (Standard Centauri Carbon size).
Material: PLA (White or high-contrast colors recommended for visibility).
Nozzle Diameter: 0.4 mm.
Layer Height: 0.12 mm (Optimized for precision snap-fit tolerances).
Infill: 100% (Required for structural rigidity and joint durability).
Supports: 0% (Design is fully self-supporting).
Build Plate Management: The front and rear frames must be rotated 45 degrees (diagonally) to fit within the 256mm build volume.
Post-Process Note: Do not remove parts while the build plate is hot. Allow the plate to reach room temperature to ensure the long-span components do not suffer from thermal deformation during removal.
Assembly Instruction:
The system employs a hardware-free snap-in architecture.
Identify the slot connectors on the Side Rails.
Press the Rear Frame into the back slots of the Side Rails until an audible click confirms engagement.
Repeat the process with the Front Frame. The Side Rails are symmetrical; orientation during assembly is non-critical.
Additional Materials:
Optional: Two strips of double-sided adhesive tape. These can be applied to the front flanges to anchor the vault to the workstation surface, eliminating lateral sliding and ensuring the unit remains stationary during frequent plate exchanges.
Key Features:
Under-Chassis Integration: Specifically height-matched for the Centauri Carbon accessory feet.
Self-Guiding Rear Ramp: A specialized internal geometry that guides the build plate into the slot, preventing snagging.
Anti-Slide Flanges: Integrated front "flags" act as physical stoppers against the desk edge or printer frame, preventing the vault from being pushed backward during plate insertion.
Tool-less Construction: Engineered tolerances allow for a permanent, rigid connection without screws or glue.
Applications:
Primary use is for the organization and protection of multiple build surfaces (PEI, PEO, PET, or Textured) for the Elegoo Centauri Carbon. It is also compatible with any third-party plates adhering to the 259x261 mm form factor.