9x19mm 9mm Parabellum Para Luger snap cap with TPU buffer insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard 9x19mm / 9mm Luger / 9mm Parabellum round as a snap cap, PLA body and TPU buffer insert
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Didn't have any 9x19mm snap caps, so I printed my own. Took the measurements straight from CIP.
The body has a Ø4mm hole with a rounded end, so you won't need any supports.
The insert should be printed in TPU. In theory it has a radial gap of 0.1 mm to the body, however taking into account all tolerances and whatnot it went in with just the right amount of persuasion, keeping near perfect retention.
I'd recommend printing the body with 4 walls for stability, the buffer I did 100% walls.
They feed fine and have survived the first few rounds of vigorous testing, so there's that.