N Scale Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of risers for N Scale tracks ranging from 0mm-50mm.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A set of risers. ranging from 0mm to 50mm in height. These can be used to create an overpass or to create a smooth supported incline.
The models are also designed to work with Bachmann EZ Track.
Printing
The bases do not require supports to print.
The riser should be printed on their sides for strength and require support.
Assembly
Print small or large base(s). All risers fit both bases.
Print riser(s). The sizes in the filename pertain to the "X" portion of the riser not the overall height.
For taller risers, you may want to consider using the large base.
Risers can be connected to increase height
Attach risers to bases. You can add a dot of super glue to permanently bind bases and risers.
Slide EZ Track thru risers. The larger the gap between risers, the more gradual the incline.
The bases can also be used as minimal risers