Tall and sturdy laptop stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily snappable together 13+ inch laptop stand, designed for Macbooks, but should work on most laptops.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
An easy to print and even more easy to assemble laptop stand. Print one left and one right piece, snap it together with three horizontal braces and you're good to go. I designed it for my 13-inch macbook, but it fits 14-inch laptops easily and technically 16 inch laptops as well. Lifts the computer up 10.5 cm from the table and has it stand at a 15 degree angle. It makes it comfortable to use next to a monitor and there's plenty of room to put stuff underneath.
I recommend to print this from at least PETG as it will get hot from the computer, maybe ABS or ASA would work even better. I printed this myself from PETG with 2 walls and 15% infill, the pieces feel really solid yet are light to carry around and have withstood 3d rendering sessions.
The pieces print without any supports, assemble and disassemble easily, require no hardware and are pre-oriented in the model.