1 / 2
Filing Cabinet Handle 100 mm centre 3.6mm holes — zdjęcie 1
1 / 2

Filing Cabinet Handle 100 mm centre 3.6mm holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement draw handles for an old filing cabinet.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

We have an old filing cabinet where the plastic handles have been broken so I designed these replacements.

The screw holes are 3.6mm with 100 mm between centres.

I probably should have printed them with extra perimeters but forgot and did them with PLA on .25 mm layer structural settings. No supports. They took about 42 min for a pair (2) on my Prusa mk4s.

They seem to be strong enough (despite the settings) even for the draw with quite heavy content, I dont know how well they would stand up to impact though so its probably best to do a few extra perimeters.