93 mm Orbital Sanding Disc Storage - Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3x3 gridfinity solution for storing your triangular 93 mm orbital sander sanding pads
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on the success of a similar design I own (https://www.printables.com/model/781474-3-18-oscillating-multitool-sandpaper-gridfinity), it was predominately only useful to the western hemisphere. There were several requests to adapt to other, larger styles that are used elsewhere in the world.
I then collaborated with @MarcoSiewert_2720994 to help provide some dimensional sizing and test prints to ensure the sanding discs would properly fit within the design. Without their help, this design wouldn't be possible. Currently the design allows for a 1.5 mm offset from the entire perimeter of the sanding disc, this was done to ensure it is easy to load/remove as needed.
I've included three variants (3U/6U/9U) based on the height of your needs. The model also includes finger cutouts to easily remove the sanding disc as needed (and save some material).